There’s no better time now than to add some extra skills to your resume.
In the time of having way too many hours stuck at home, you’ve probably tried your hand at some things you may be hesitant to admit. Perhaps you’ve tried learning a new dance move, or maybe you failed terribly at cooking a beef wellington.
If you’re better with handy work, take some time to learn how to replace a garage door spring. We don’t want to jinx anything, but this could come in handy if your car ever becomes trapped in the garage.
Are you not sure how to do it? You’ve come to the right place. Below is a quick lesson on how to replace a broken garage door spring.
What Is a Garage Door Spring?
Before you start taking things apart, it’s important to make sure you know what a garage door spring is and what it does.
Having a spring for your garage door is crucial because it’s one of the main components that allow the door to be raised and lowered. Overall, it makes it really easy for the door to go against gravity and be lifted.
Make sure you grab the correct door spring before diving too deep into the project. There are a couple of main types to look out for.
One type of spring is torsion springs, and these go directly above the door. The other main type is extension springs. These are typically found on the tracks of the door.
Now that you know what kind to look out for, let’s get ready to fix the broken garage door spring. However, if you want to leave it to a professional, check out https://www.directserviceoverhead.com.
Changing the Spring
One key point to keep in mind is that changing a spring can come with a lot of safety hazards. If you have a torsion spring system, you might want to call a professional because they can pack a lot of punch when released.
If you have extension springs, these are easier to change but still use caution. Other than that, make sure you have safety glasses, some gloves, and a ladder to get started.
Start by putting the garage door up, and clamp something on the door to keep it in place. You’re going to then want to locate the pulley and track bracket. Once you find it, take off the broken spring.
Double-check that you purchased a spring as identical as you can find it to your old one, and read the package to make sure it can lift the proper weight.
Attach the new spring to the bracket, and make sure you properly thread the safety cable through the brand new spring. Grab the pulley and safety cable, and go ahead and reattach the two.
Lastly, connect the garage door opener, and test it all out! Just make sure you take your time when doing a vital garage door repair such as this.
Now You Know How to Replace a Broken Garage Door Spring
Learning how to replace a broken garage door spring doesn’t have to extremely difficult. Pull out your safety glasses, gloves, and a DIY attitude.
Check to see what types of springs your door uses, and buy a replacement as close to the broken springs as possible. Proceed with caution when replacing them, and follow the directions above.
If you want to read more about home improvement or repairs, make sure to check out the rest of our site.
